Table of Contents
Advertisement
System Configuration Setup
Removable Media Support
Do not change this setting.
CHS-Mapping
Do not change this setting.
Spinup Delay (Secs)
Do not change this setting.
Secondary Cluster Server
Do not change this setting.
Termination Control
Do not change this setting.
<Restore Defaults>
Returns settings to their default state.
<Device Properties>
Specifies SCSI device parameters.
MB/Sec
MT/Sec
Specifies the SCSI controller maximum data transfer rate.
Data Width
Specifies the SCSI controller's data transfer width.
Scan ID
Specifies whether the SCSI controller scans SCSI devices for their ID.
ScanLUNs
Specifies whether LUNS should be scanned when an ID contains more than one.
Dis-connect
Specifies whether SCSI devices can be disconnected or reconnected to the bus.
SCSI Time Out
Specifies the time out period.
QueueTags
Specifies whether que tagging will be used.
Onboard SCSI Utility
None
SCSI Plug and Play Mapping
2
No
Auto
160
80
16
Yes
Yes
On
10
On
110
Advertisement
Table of Contents
