NEC SL1100 Programming Manual page 155

ISSUE 6.0
Item Item
No.
09 Caller ID Func-
tion - For Exter-
nal Module
10 Caller ID Name
11 Caller ID Type
12 Fixed Cadence
13 MW sending type 0 = Lamp
14 Forwarded Caller
ID Display Mode
15 Disconnect with-
out dial after
hooking hold
16 Special DTMF
Protocol Send
17 Dial Tone Select
18 Select Special
Terminal Type
(V2.0 Added)
19 Door Phone
Number (V4.0
Added)
Do not set
the same
door phone
number be-
tween
PRG10-03-0
5 (SLIU) and
PRG15-05-4
6.
Programming Manual
Input Data
0 = Disable (Caller ID Enable (1) or disable (0) the Caller
not displayed.) ID FSK signal for an external Caller
1 = Enable (Caller ID is ID module or a 3rd party vendor tel-
displayed.) ephone with Caller ID display.
Important:
If voice mail is used, this setting
must be disabled for the system in-
tegration codes to be correct.
0 = Disable Determine if an extension user tele-
1 = Enable phone should display the Caller ID
name.
0 = FSK Determine whether the Caller ID
1 = DTMF type is FSK or DTMF.
0 = Normal
1 = Fixed
1 = Caller ID
0 = Calling Extension Determine what the display shows
Number (Calling) when a multiline terminal receives a
1 = External Caller ID forwarded outside call.
(Forward)
0 = Normal Determine whether or not to discon-
1 = Disconnect nect a held call when on-hook with-
out any dialing after hooking-hold.
0 = No Determine whether or not to send
1 = Yes the extension number of the phone
forwarded to the extension when
Program 15-03-04 is set to Special
(1) and not in the VM group.
0 = Normal When the function of MW has been
1 = New DT set from another extension or VM,
the dial tone upon off hook is selec-
ted.
0 = Fax This PRG is used for selecting Spe-
1 = Modem cial Terminal Type (Fax or Modem).
This setting influences how to trans-
mit data via SIP trunk. This PRG is
effective at the time of when
PRG15-03-03 1: Special.
1 ~ 6 Set the SLT door phone number.
When unlocking the door PRG10-61
will be in effect.
Description
With a Single Line Telephone,
this must be set to 0 for incoming
callers to have a talk path.
SL1100
Default Related
Program
0
1 15-03-09
0
1
0
0
0
0 45-01-16
0
0 15-03-03
0 10-03-05
(SLIU)
10-61
15-05-46
2-135
Program
15