Dial Analysis Extension Table - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
When Program 44-02-02 is set to type 3, use Program 44-03 : Dial Analysis Extension Table to set
Program
the dial extension analysis table. These tables are used when the analyzed digits must be more than
eight digits. If the received digits do not match the digits set in tables 1 ~ 250, table number 252 is
44
used to refer to the next Extension Table Area (1 ~ 4) to be searched. If the received digits are not
identified in tables 1 ~ 250, the F-Route selection table number defined in table 251 is used.
Input Data
Dial Analysis Table Number : 1 ~ 250
Item
No.
01 Dial
02 ARS/F-Route Select Table Number
Dial Analysis Table Number : 251
Item
No.
03 ARS/F-Route Select Table Number
Dial Analysis Table Number : 252
Item
No.
04 Next Table Area Number
2-392
Program 44 : ARS/F-Route Setup

44-03 : Dial Analysis Extension Table

Extension Table Area Number
Dial Analysis Table Number
Item
Up to 36 digits
Digits = 1 ~ 9, 0,
(Press Line Key 1 for wild character @)
0 ~ 100 (ARS/F-Route Table Number)
With Program 44-01 set to 0, Program 44-05 is
checked.
With Program 44-01 set to 1, Program 44-04 is
checked.
Item
0 ~ 100 (ARS/F-Route Table Number)
With Program 44-01 set to 0, Program 44-05 is
checked.
With Program 44-01 set to 1, Program 44-04 is
checked.
Item
0 ~ 4
1 ~ 4
1 ~ 252
Input Data
, #, @
*
Input Data
Input Data
Program 44 : ARS/F-Route Setup
ISSUE 6.0
Default
No Setting
0
Default
0
Default
0