Security Sensor Setup - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 20-46 : Security Sensor Setup to defines the security sensor.
Program
20 Input Data
Item
No.
01 Sensor Mode
02 Internal Paging Group
for Warning Message
03 Ring Timer
04 VRS Message for
Warning
05 Auto Dial Number
Area Setting
06 VRS Message for An-
swer
07 Auto Dial Wait Timer
08 Time of Repeat Auto
Dial
09 Auto Dial Calling
Time
10 Monitored Terminal
11 Interval of Auto Dial
Conditions
None
Feature Cross Reference
None
2-222
Program 20 : System Option Setup
Security Sensor Number
Item Input Data
0 = Off
1 = On
0 ~ 32
0 ~ 8
0 ~ 100
0 ~ 999
0 ~ 100
0 ~ 64800
0 ~ 255
0, 1 ~ 3600
0 = No Auto Dial
Extension Number (Up
to 8 digits)
0 ~ 3600

20-46 : Security Sensor Setup

1 ~ 6
Description
Define door port (084M 3, 4) to use as
Sensor.
Define Internal paging group number for
Warning message
Define External paging group number for
Warning message.
Define VRS number used for Warning
message.
Define Speed dial number when sensor
detects warning.
Define VRS message number when emer-
gency call destination answered.
Define wait time before making emergency
auto dial.
Define repeat number for making emer-
gency call.
Define calling continue time when making
emergency call.
Define extension number for monitor from
outside. IP terminal cannot set as moni-
tored extension.
Program 20 : System Option Setup
ISSUE 6.0
Default
0
0
0
0
0
0
30
3
30
No Setting
0