NEC SL1100 Programming Manual page 372

SL1100
Item
No.
13 CLI Output When DID
to Trunk
14 Date
15 CLI/DID Number
Switching
Program
16 Trunk Name or Re-
ceived Dialed Number
35
17 Print Account Code
or Caller Name of In-
coming Call
18 Print Mode for Caller
Name of Incoming
Call
19 Dialed Number Out-
put Format
20 External Information
CFW Mode
21 S-Point Terminal
Number
22 Security Auto Dialing
23 Watch Auto Dialing
25 Call Waiting (V4.0
Added)
Conditions
None
2-352
Item Input Data
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = CLI (CLIP)
1 = DID Calling Number
2 = Calling Party Name
0 = Trunk Port Name
1 = Received Dialed
Number
2 = Both
0 = ACC
1 = CNAME
0 = Normal
1 = Line Feed
0 = Display from the first
digit
1 = Display from the last
digit
0 = Transfer Information
1 = Incoming Information
0 = MSN Number
1 = Extension Number
0 = No Output
1 = Output
0 = No Output
1 = Output
0 = No Output
1 = Output
Description
Determine if the CLI output should be dis-
played for DID.
Determine whether or not the date should
be displayed on SMDR reports.
This option must be set to 0 if the trunk
name is set to be displayed in Program
35-02-03.
Determine whether or not the CLI/DID
Number Switching should be displayed.
Determine how the SMDR should print in-
coming calls on ANI/DNIS or DID trunks. If
set to (1), ANI/DNIS trunks can print DNIS
digits. If set to (0) trunk names are printed
instead.
Determine if SMDR should print Account
Code or Caller Name of Incoming Call.
Determine how SMDR should print Caller
Name of Incoming Call.
Determine if the dialed number should dis-
play from the first digits or from the last
digits. This option is only available for out-
going calls.
Determine which information is displayed
in the "STATION" area for a transferred
call when the extension has Call Forward
set with an Abbreviated Dial number as
the destination. Selecting "0" (Transfer In-
fo) will display the extension number which
called the extension with external Call For-
ward set. Selecting "1" (Incoming Info) will
display the extension number which has
the external Call Forward set.
This option only applies when Call For-
ward is set using a service code (Pro-
grams 11-11-01 ~ 11-11-07) and the desti-
nation uses an Abbreviated Dial bin. It
does not include Off-Premise or Centrex
transfers.
Emergency call from Watch Mode. Define
SMDR output on/off. Output is SAD (Se-
curity auto dialing).
Emergency call from Remote Inspection.
Define SMDR output on/off. Output is
WAD (Watch auto dialing )
Define Call Waiting output on/off
Program 35 : SMDR Account Code Setup
ISSUE 6.0
Default
0
0
0
0
0
0
0
0
0
1
1
1