System Options For Caller Id - NEC SL1100 Programming Manual

SL1100
Level:
IN
Description
Use Program 20-19 : System Options for Caller ID to define the system options for the Caller ID
Program
feature.
20
Input Data
Item
No.
01 Caller ID Displaying
Format
02 Caller ID Wait Timer
03 Caller ID Edit Mode
(V2.0 Added)
04 Wait Facility IE Timer
05 Caller ID Sender
Queuing Time (Send-
er Wait)
07 Long Distance Code
08 Area Code
09 Calling party Name
for ISDN Trunk
Conditions
None
Feature Cross Reference
• Caller ID
2-200
Program 20 : System Option Setup

20-19 : System Options for Caller ID

Item Input Data
0 = First 10 digits (Up-
per)
1 = Last 10 digits (Low-
er)
0 ~ 30 seconds
0 = Off
1 = On
0 ~ 64800 seconds
0 ~ 64800 seconds
Up to two digits
Up to six digits
Maximum of 12 digits (0
~ 9, , #)
*
Description
(if displaying digits are more than 12 digits)
When an incoming CO call is received, the
SL1100 starts the timer. It will wait the pro-
grammed time for Caller ID information
from Telco before connecting the CO call.
If Caller ID Edit Mode is disabled (0), no
access code will be added to the Caller ID.
If this option is enabled (1), the access
code entered in PRG 10-02-02 & 10-02-03
will be added to the beginning of the Caller
ID.
This timer is used with ISDN trunks to de-
termine how long the system waits for the
Caller ID name from the Telco.
When a name is programmed in this pro-
gram this will be the name sent out for all
callers that have PRG 15-01-10 enabled.
Program 20 : System Option Setup
ISSUE 6.0
Default
0
5
0
10
0
1
No Setting
No Setting