Presentation - Husqvarna AUTOMOWER 315 Operator's Manual

2 Presentation

This chapter contains information that is important to be
aware of when planning the installation.
Installing a Husqvarna robotic lawnmower involves four
main components:
• A robotic lawnmower that mows the lawn by essentially
operating in a random pattern. The robotic lawnmower
is powered by a maintenance-free battery.
• A charging station, to where the robotic lawnmower
automatically returns when the charge level in the
battery becomes too low.
The charging station has three functions:
• To send control signals along the boundary wire.
• To send control signals along the guide wire.
• To charge the battery in the robotic lawnmower.
• A power supply, which is connected between the
charging station and a 100V-240V wall socket. The
power supply is connected to the wall socket and to
the charging station using a 10 m long low voltage
cable. The low voltage cable must not be shortened
or extended.
A longer low voltage cable is available as optional
accessory. Please contact your dealer for more
information.
The appearance of the power supply may differ
depending on market.
• A loop wire, laid in a loop around the robotic
lawnmower's working area. The loop wire is laid
around the edges of the lawn and around objects and
plants that the robotic lawnmower must not run into.
The loop wire is also used as the guide wire.
The maximum permitted length for the boundary loop
is 800 m.
IMPORTANT INFORMATION
Loop wire for the boundary, pegs, con-
nector for the loop wire and couplers for
the loop wire are purchased in a separate
Installation kit.
Always use genuine spare parts and ac-
cessories
English - 10
OM_1157863-26_HQ 310,315,EN_160229.indd 10
PRESENTATION
3012-1305
3012-1041
3012-1352
3012-221
2016-02-29 10:51:33