Husqvarna AUTOMOWER 315 Operator's Manual page 55

Finding the charging station
The robotic lawnmower can be set to search for the
charging station in one or more of the following three
ways: Guide, Boundary loop and Charging station. The
factory settings are that these three search options are
automatically combined to find the charging station as
quickly as possible but also with a minimum risk of tracks
forming.
In very complex gardens e.g. with many areas joined by
narrow passages, the amount of time required to find the
charging station is decreased by carrying out a number
of the manual setting outlined below.
The robotic lawnmower always starts the search for the
charging station using an irregular search method.
When the robotic lawnmower still cannot find the charging
station after a specific period of irregular searching, it also
starts to search for the guide wires and after a further
period also the boundary wire to follow one of them into
the charging station instead. This time is specified in
minutes and is known as delay time.
Example:
3 minute delay for Guide and 11 minutes for the
boundary loop. The robotic lawnmower then searches
irregularly for 3 minutes and then searches for the
guide wires for 8 minutes. If it has not found a guide
wire after this period, the robotic lawnmower now also
searches for the boundary loop.
It is possible of course to specify the same delay time
for both the guide wires and boundary loop, for instance
5 minutes. The robotic lawnmower then searches
irregularly for 5 minutes and when it does not find the
charging station, it continues to search either by following
the guide wires or the boundary loop, depending on which
one it reaches first.
In general a long delay time decreases the risk of tracks
forming (the robotic lawnmower will find the charging
station more often through irregular searches) but gives
longer search times. A short delay time gives the opposite
effect, i.e. short search times with increased risk of tracks
forming along the guide wires and/or boundary wires.
Overview
This function summarises the selected settings for each
search method. To edit the settings for a method, select the
method using left and right arrow keys followed by OK.
OM_1157863-26_HQ 310,315,EN_160229.indd 53
MENU FUNCTIONS
=Delay time
=Search mode
Boundary wire
Guide 1
Random
3 min 11 min
3012-1412
3012-1349
English - 53
2016-02-29 10:52:21