Operation Selection Parking; Main Switch - Husqvarna AUTOMOWER 315 Operator's Manual

Spot Cutting
Not applicable for Automower® 310.
Spot cutting means the robotic lawnmower will work in a
spiral pattern in order to cut the grass in the area where
it was started. When this is done, the robotic lawnmower
will automatically switch to Main Area or Secondary Area.
This function is useful for quickly mowing an area where
the grass has been mown less than in other parts of the
garden.
The Spot Cutting function is activated with the START
button. You can select how the robotic lawnmower should
continue to work once mowing is finished by pressing
Right Arrow and then specifying On Main Area or On
Secondary Area.

5.2 Operation selection Parking

When the PARK button is pressed the following operation
selections can be chosen.
Park until further notice
The robotic lawnmower stays in the charging station
until another operating mode is selected by pressing
the START button.
Start again in 3 hours
The robotic lawnmower stays in the charging station for
three hours and then returns automatically to normal
operation. This operation selection is suitable when there
is a need to pause operation, e.g. for temporary irrigation
or for games on the lawn.
Start with next timer
The robotic lawnmower stays in the charging station until
the next Timer setting permits operation. This operation
selection is suitable if one wishes to cancel an ongoing
mowing cycle and allow the robotic lawnmower to stay in
the charging station until the next day.

5.3 Main switch

Set the main switch in the 1 position to start the robotic
lawnmower.
Set the main switch in the 0 position when the robotic
lawnmower is not in use or work is being carried out on
the blade disc.
When the main switch is set in the 0 position the motors
on the robotic lawnmower cannot start.
OM_1157863-26_HQ 310,315,EN_160229.indd 41
CONTROL PANEL
3012-1430
3012-1301
English - 41
2016-02-29 10:52:01