Husqvarna AUTOMOWER 315 Operator's Manual page 22

Do not, under any circumstances, mount the power
supply at a height where there is a risk it can be
submerged in water (at least 30 cm from the ground). It is
not permitted to place the power supply on the ground.
Never connect the power supply to a outlet if plug or cord
is damaged. Damaged or entangled cord increase the
risk of electric shock.
IMPORTANT INFORMATION
Use the power supply's plug to disconnect
the charging station, for instance before
cleaning or repairing the loop wire.
Installing and connecting the charging
station
1. Position the charging station in a suitable spot.
2. Tilt the protective cover on the charging station
forward and connect the low voltage cable to the
charging station.
3. Connect the power supply's power cable to a 100-
240 V wall socket.
4. Attach the charging station to the ground using
the supplied screws. Ensure the screws are
screwed all the way down in the countersink. If
the charging station is placed against a wall, it is
best to wait before securing the charging station
to the ground until after all the wires have been
connected.
IMPORTANT INFORMATION
It is not permitted to make new holes
in the charging station's plate. Only the
existing holes may be used to secure the
base plate to the ground.
IMPORTANT INFORMATION
Do not tread or walk on the charging
station's plate.
English - 20
OM_1157863-26_HQ 310,315,EN_160229.indd 20
INSTALLATION
min 30cm/12"
3012-1344
3012-1110
3012-1345
3012-1045
2016-02-29 10:51:43