Uninstalling Feature Or Patch Images - HP 12500 Configuration Manual

When you install or upgrade a software image on the active MPU, the system automatically installs
•
or upgrades the software image on the service cards as needed. You do not need to install or
upgrade the software of the service cards separately.
Installation and upgrade procedure
To install or upgrade a boot image, a system image, or feature images, execute the following commands
in user view:
Step
(Optional.) Check for
1.
the ISSU method to
be used for the
upgrade and the
possible impact of
the upgrade.
2. Activate the images.
3. (Optional.) Confirm
the software
changes.
To install or upgrade patch images, execute the following commands in user view:
Step
1. Activate the patch
images.
2. (Optional.)
Confirm the
software changes.

Uninstalling feature or patch images

You can uninstall only feature images and patch images from the device. Boot and system images cannot
be uninstalled.
Command
•
In standalone mode:
install activate { boot filename | system
filename | feature filename&<1-30> } * slot
slot-number test
•
In IRF mode:
install activate { boot filename | system
filename | feature filename&<1-30> } *
chassis chassis-number slot slot-number test
•
In standalone mode:
install activate { boot filename | system
filename | feature filename&<1-30> } * slot
slot-number
•
In IRF mode:
install activate { boot filename | system
filename | feature filename&<1-30> } *
chassis chassis-number slot slot-number
install commit
Command
•
In standalone mode:
install activate patch filename slot slot-number
•
In IRF mode:
install activate patch filename chassis
chassis-number slot slot-number
install commit
145
Remarks
N/A
An image takes effect only
after it is activated.
To keep activated images
effective after a reboot, you
must confirm the software
changes.
Remarks
An image takes effect only
after it is activated.
To keep activated images
effective after a reboot, you
must confirm the software
changes.