Assigning User Roles To Non-Aaa Authentication Users On User Interfaces - HP 12500 Configuration Manual

Step
2. Create a local user and
enter local user view.
3. Authorize the user to have a
user role.
4. Exit to system view.
5. (Optional.) Enable the
default user role function.
Assigning user roles to non-AAA authentication users on user
interfaces
Specify user roles for the following two types of login users on the user interfaces:
Users that use password authentication or no authentication.
•
SSH clients that use publickey or password-publickey authentication. User roles assigned to these
•
SSH clients are specified in their respective local management user accounts.
For more information about user interfaces, see "Login overview" and "Logging in to the CLI." For more
information about SSH, see Security Configuration Guide.
To assign a user role to non-AAA authentication users on a user interface:
Step
Enter system view.
1.
2. Enter user interface view.
Command
local-user user-name class
{ manage | network }
authorization-attribute user-role
role-name
quit
role default-role enable
Command
system-view
user-interface { first-num1
[ last-num1 ] | { aux | console |
vty } first-num2 [ last-num2 ] }
22
Remarks
N/A
Repeat this step to assign the user to up
to 64 user roles.
By default, network-operator is
assigned to local users created by a
network-admin user, and
mdc-operator is assigned to the local
users created by an mdc-admin or
level-15 user.
N/A
Use this step if you configure non-AAA
authorization for the local AAA user.
The default user role function is
disabled. Local AAA users that do not
have a user role cannot log in to the
device.
Remarks
N/A
N/A