HP 12500 Configuration Manual page 77

Step
1. Enter system view.
2. (Optional.) Specify a source
IP address for outgoing FTP
packets.
3. Return to user view.
4. Log in to the FTP server.
To establish an IPv6 FTP connection:
Step
1. Enter system view.
2. (Optional.) Specify the source
IPv6 address for FTP packets
sent by the FTP client.
3. Return to user view.
4. Log in to the FTP server.
Command
system-view
ftp client source { interface interface-type
interface-number | ip source-ip-address }
quit
•
(Approach 1) Log in to the FTP server
directly in user view:
ftp server-address [ service-port ]
[ vpn-instance vpn-instance-name ]
[ source { interface { interface-name
| interface-type interface-number } |
ip source-ip-address } ]
•
(Approach 2) Log in to the FTP server
in FTP client view:
a. ftp
b. open server-address
[ service-port ]
Command
system-view
ftp client ipv6 source { interface
interface-type interface-number |
ipv6 source-ipv6-address }
quit
•
Log in to the FTP server directly
in user view:
ftp ipv6 server-address
[ service-port ] [ vpn-instance
vpn-instance-name ] [ source
{ interface interface-type
interface-number | ipv6
source-ipv6-address } ] [ -i
interface-type
interface-number ]
•
Log in to the FTP server in FTP
client view:
a. ftp ipv6
b. open server-address
[ service-port ]
69
Remarks
N/A
By default, no source IP
address is specified, and the
primary IP address of the
output interface is used as the
source IP address.
N/A
Use either approach.
The source IP address
specified in the ftp command
takes precedence over the
one set by the ftp client source
command.
Remarks
N/A
By default, no source IPv6 address
is specified. The source address is
automatically selected as defined
in RFC 3484.
N/A
Use either approach.
The source IP address specified in
the ftp ipv6 command takes
precedence over the one set by the
ftp client ipv6 source command.