HP 12500 Configuration Manual page 83

439291 bytes received in 1.08 seconds (395.6 kbyte/s)
# Download the file temp.bin from the PC to the Flash root directory of the IRF fabric's standby MPUs. (In
this example the IRF fabric has three standby MPUs: one in slot 1 of member device 1, one in slot 0 of
member device 2, and one in slot 1 of member device 2.)
ftp> get temp.bin chassis1#slot1#flash:/temp.bin
ftp> get temp.bin chassis2#slot0#flash:/temp.bin
ftp> get temp.bin chassis2#slot1#flash:/temp.bin
# Upload the configuration file startup.cfg from the IRF fabric to the PC for backup.
ftp> ascii
200 Type is ASCII
ftp> put startup.cfg back-config.cfg
227 Entering Passive Mode (192,168,3,51,7,100)
150 "D:\test\startup.cfg" file ready to receive in ASCII mode
226 Transfer finished successfully.
2749 bytes sent in 0.000284 seconds (9.23 Mbyte/s)
ftp> bye
221 Windows FTP Server (WFTPD, by Texas Imperial Software) says goodbye
<Sysname>
75