Http Feature Rollback Example - HP 12500 Configuration Manual

HTTP feature rollback example

Rollback requirement
As shown in
(standby MPU).
Roll back the HTTP feature from R0202 to R0201.
Rollback procedure
# Display active software images.
<Sysname> display install active
Active packages on slot 0:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
Active packages on slot 0.1:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
Active packages on slot 1:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
Active packages on slot 1.1:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
# Display available rollback points.
<Sysname> display install rollback
Install rollback information 1 on slot 0:
Updating from flash:/http-r0201.bin
Install rollback information 2 on slot 1:
Updating from flash:/http-r0201.bin
# Roll back the HTTP feature to R0201.
<Sysname> install rollback to original
# Display active software images.
<Sysname> display install active
Active packages on slot 0:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0201.bin
Active packages on slot 0.1:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0201.bin
Active packages on slot 1:
Figure 45, Device has two MPUs: one is in slot 0 (active MPU) and the other is in slot 1
to flash:/http-r0202.bin.
to flash:/http-r0202.bin.
152