6.2
CYCLE982 Tool: Measure turning tools
6.2.1
Function overview
Function
The CYCLE982 cycles each implement the
• Calibration of a tool probe
and
• Measuring turning tools
(machine-related, probe arrays _TP[ ]).
Tool lengths
L1, L2 of turning tools with cutting edge
positions SL = 1 to 8 are measured.
It is only possible to measure tools with one
calibrated tool probe.
Programming
CYCLE982
Note
Tolerance parameters _TSA, _TDIF and _TZL must be entered taking into account machine
data
• MD 20360 TOOL_PARAMETER_DEF_MASK bit0 and bit1
in conjunction with the offset target
• geometry and wear.
Measuring variants
The CYCLE982 measuring cycles permit the following measurement variants which are
specified via parameter _MVAR.
Value
0
1
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring variant
Calibrate tool probe (machine-related)
Measure tool (machine-related)
Measuring Cycles for Turning Machines
6.2 CYCLE982 Tool: Measure turning tools
263