Central Bits; In Data Block Gud6.Def - Siemens SINUMERIK 840D sl Programming Manual

9.2.4

Central bits

9.2.4.1

In data block GUD6.DEF

_CBIT[ ]
Central bits
Changes valid after value assignment
Data type BOOLEAN
Significance:
_CBIT[0]
_CBIT[1]
_CBIT[2]
_CBIT[3]
_CBIT[4]
_CBIT[5]
_CBIT[6]
_CBIT[7]
_CBIT[8]
_CBIT[9]
_CBIT[10]
_CBIT[11]
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Min. input limit: 0
Protection level: -
Measurement repetition after violation of dimensional difference
and safe area
0: no measurement repetition
1: measurement repeat, up to 4
Alarm and M0 for measurement repeat with _CBIT[0]=1
0: no alarm, no M0 generated
1: M0 and an alarm are generated before each repeat
M0 for tolerance alarms "oversize", "undersize", "permissible
dimensional difference exceeded"
0: no generation of M0 for the above alarms
1: generation of M0 for the above alarms
currently not assigned
currently not assigned
Tool measurement and calibration in the WCS in CYCLE982
0: machine-related measurement and calibration
1: workpiece-related measurement and calibration
Note: In both cases, the _TP[ ] field of the probe is used.
A function switchover using _MVAR is available.
Logging without output of the measuring cycle name and
measurement variant
0: Measuring cycle name and measuring variant will be output.
1: These outputs will be suppressed.
Support for orientational tool carriers
0: No support for orientational tool carriers
1: Support for probes and/or tools positioned using orientational
tool carriers
Offset of mono probe position
0: No offset
1: If the workpiece measuring probe is a mono probe, its
position (spindle position) is corrected by the angular value in
_CORA.
Assigned internally
currently not assigned
Selection of log header for logging
0: Standard
1: user-defined
Data description
9.2 Cycle data
Max. input limit: 1
Units: -
Preset default
0
0
0
0
0
0
0
1
0
0
0
391