Parameters Of "Calculate Kinematics" Screen Form - Siemens SINUMERIK 840D sl Programming Manual

Measuring Cycles for Milling and Machining Centers
5.10 CYCLE996 workpiece: Measure kinematics
5.10.6.3

Parameters of "Calculate kinematics" screen form

Pressing VSK6, "Calculate kinematics" displays the following screen form:
Name (Name/number of the swivel data record)
Select the swivel data records set in MD 18088: MM_NUM_TOOL_CARRIER
Parameter: _TNUM
Measuring result
Selection:
● Measure only (only "Measure" and "Calculate vectors")
● Enter ("Measure", "Calculate vectors" and "Enter vectors in swivel data record")
For coding, see _MVAR
The result parameters from _OVR[1] are calculated in both selections.
The "Enter" option is only displayed when the manufacturer password is set. When the
option to "Enter" vectors is selected, the linear vectors (offset vectors) are entered in the
swivel data record. If input fields of the tolerance values are not equal to zero and these are
overwritten after measurement, then the linear vectors are not automatically entered.
Rotary axis vectors V1 and V2 are not entered automatically.
Observe the machine manufacturer's instructions!
250
CAUTION
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
Measuring cycles