Siemens SINUMERIK 840D sl Programming Manual page 456

Appendix
A.4 Overview of measuring cycle parameters
Channel-oriented values
Block Identifier
_EVMVNUM
GUD6 _EVMVNUM[0]
GUD6 _EVMVNUM[1]
_SPEED
GUD6 _SPEED[0]
GUD6 _SPEED[1]
GUD6 _SPEED[2]
GUD6 _SPEED[3]
_EV
GUD5 _EV[x]
_MV
GUD5 _MV[x]
Channel-specific values (for measuring in JOG, GUD7_MC)
Block Identifier
GUD7 E_MESS_IS_METRIC
E_MESS_IS_METRIC_SP
EZ_VAR=1
GUD7 E_MESS_MS_IN
GUD7 E_MESS_MT_IN
GUD7 E_MESS_D
GUD7 E_MESS_D_M
GUD7 E_MESS_D_L
GUD7 E_MESS_D_R
GUD7 E_MESS_FM
GUD7 E_MESS_F
GUD7 E_MESS_FZ
GUD7 E_MESS_CAL_D
GUD7 E_MESS_CAL_L
GUD7 E_MESS_MAX_V
GUD7 E_MESS_MAX_S
GUD7 E_MESS_MAX_F
456
Description
Number of empirical values and mean values
Number of empirical values
Number of mean values
Traversing velocities for intermediate positioning
Max. rapid traverse in % (only active with collision
monitoring switched off, max 100 %)
Positioning velocity in the plane with collision monitoring
active
Positioning velocity applicate
Fast measuring feed
Empirical values
Empirical value
Mean values
Mean value
Description
All dimensioned data are metric
Measurement input 1 for workpiece measurement
Measurement input 2 for tool measurement
Internal data item
Measuring path for manual measuring [mm] (in front of
and behind meas. point)
Measuring path for length measurement [mm] (in front
of and behind the measuring point) for tool
measurement
Measuring path for radius measurement [mm] (in front
of and behind the measuring point) for tool
measurement
Measuring feed [mm/rev]
Plane feedrate for collision monitoring [mm/min]
Infeed feedrate for collision monitoring [mm/min]
Diameter, calibration ring
Calibration dimension in the feed axis (referred to WCS) 0
Max. peripheral speed for measuring with rotating
spindle [m/min]
Max. spindle speed for measuring with rotating spindle
[rpm]
Max. feedrate for measuring with rotating spindle
[mm/min]
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
As-delivered value
20
20
100
1000
1000
900
0
0
As-delivered value
1
0
1
5
50
2
1
300
2000
2000
0
100
1000
20
Measuring cycles