Application Server Installation - NEC D3-10i Quick Start Manual

11. At this point, the installation process has been
completed and a system restart will be required
before starting Storage Manager for the first
time. Either click Finish to close the Storage
Manager Setup and restart the server, or if you
do not want to restart the server at this time,
select Restart later, and then click Finish.
12. After the management server has restarted, the
Setup Complete window will appear. Clicking
Finish will launch a Web browser window that
will prompt for a login and then launch the
initialization wizard for the array.
Clicking Cancel will still finish the installation but
will not open a browser window and initialize the
array.

Application Server Installation

After installing software on the management server, the application servers need to be prepared to connect to
the array by installing an auto-discovery host agent on the application servers.
The auto-discovery host agent allows you to perform an auto-discovery of hosts during the array initialization
process when binding logical drives. This host agent can either be installed as part of iSM Volume List
Command or Control Command.
The iSM Volume List installation provides basic host server functionality and the Control Command installation
provides advanced features that are necessary when using the advanced software functions of the array.
The following steps outline the process to install the Control Command host agent and configure the application
servers to connect with the array through an iSCSI connection with a software iSCSI initiator. For information
about how to install iSM Volume List, please refer to the NEC Storage Manager Manuals section on the Storage
Manager CD.
NEC D3-10i Quick Start Guide 16