Table of Contents
Advertisement
17. At the Enter License Keys window, type in the
Base Product License key from the NEC Storage
software license code provided on the Program
Product License Sheet that was shipped with the
array. Click Enter after the code has been typed
in the License Key field. When the code has
been typed, click Next to continue.
Note: At this time, do not enter in other license
codes. More specifically, if you enter the Access
Control license key, you will need to set up
Access Control or servers will not be able
access the Logical Disks. Setting up Access
Control is not included in the Quick Start Guide.
18. In the Select Logical Disk Binding Method
window, you can choose between binding logical
disks within the initialization wizard and creating
logical disks after completing the initialization
process.
Choosing the Bind logical disks using the
wizard option allows you to use the wizard to
create and bind logical disks to application
servers using RAID1, RAID6 (4+PQ), or RAID6
(8+PQ) while performing the array initialization.
If another type of logical disk is required, this
step can be skipped by choosing the Bind
logical disks later option.
After choosing the appropriate option, click Next
to continue.
19. If the Bind logical disks using the wizard
option was selected in the previous step, the Set
the LD Set window will be shown. Here you can
specify which operating system platform the
logical disk set will be used with, and name the
logical disk set.
From this window, you can also configure iSCSI
CHAP Authentication settings and set access
restrictions on a per-portal basis by clicking
either the Authentication Settings or Access
Restriction per Portal button.
After you have finished modifying the settings for
the logical disk set, click Next to continue.
NEC D3-10i Quick Start Guide
39
Advertisement
Table of Contents
