Table of Contents
Advertisement
5. After any necessary disk initialization process
has been completed, the new logical drives
should be visible from within the Disk
Management window. The logical disks are now
ready to be configured for use on the application
server and formatted as needed.
If the logical drives do not appear on the
application server, check all physical
connections and restart the application server.
If they still do not appear or were not created
during the array initialization process, attempt to
create and bind logical drives through the
Storage Manager client as shown in the
Configuring Logical Disks and Pools section that
appears later in this guide.
NEC D3-10i Quick Start Guide
45
Advertisement
Table of Contents
