Table of Contents
Advertisement
Configuring the iSCSI Initiator in VMware ESX
After the array has been initialized and any logical drives that will be used by the VMware ESX host server have
been configured, the iSCSI storage settings can be configured within the VMware host server to enable the
drives for use on guest operating systems.
Note: This section only details the basic configuration steps needed to configure VMware ESX to work with the
NEC D3-10i storage array. For more information about advanced configuration items for VMware ESX or to
configure other versions of VMware to use an iSCSI array, please refer to the VMware ESX iSCSI SAN
documentation at http://www.vmware.com/support/pubs/.
1. Log on to the VI Client and select the host server from the listed inventory.
2. Click the Configuration tab, and then click
Storage.
3. Click Add Storage from the Storage window.
4. At the Select Storage Type window, select the
Disk/LUN option, and then click Next.
NEC D3-10i Quick Start Guide
46
Advertisement
Table of Contents
