NEC D3-10i Quick Start Manual page 56

Creating and Configuring Logical Drives
With a pool created and physical drives configured for use in that pool, logical drives can be configured for use
within the pool and bound to application servers. The following steps will use the Logical Drive Binding wizard to
create logical drives and bind them to a host application server.
1. Navigate to the Storage Manager server address in an Internet Explorer window, and then log on to the
Storage Manager client with a user account that has administrative privileges.
2. Navigate to the Storage Manager network
address in an Internet Explorer window, and
then log on to the client with an account that has
administrative privileges.
3. Select the array where logical disks and pools
need to be created, click File, highlight
Configuration Settings/References, Quick
Configuration, and then click LD Binding
(iSCSI).
Note: For more information about the
other configuration options available
through the Configuration Settings
menu, please refer to the documentation
on the Storage Manager installation CD.
4. A window will appear warning you that array
monitoring will be stopped while configuration
settings are being adjusted. Click Yes to
continue.
5. At the iSCSI Setting menu, you can edit or
delete existing logical disk sets or you can
create new logical disks.
To create an individual pool and logical disk set
from the Configuration Setting menu, click
Create.
NEC D3-10i Quick Start Guide 54