Table of Contents
Advertisement
Chapter 4. User Maintenance
9. To set additional extension WalkingTRS Codes, press the
volume up and down key or press the HOLD key to move
to the desired Extension.
10. Repeat steps 8-10 until all extension are entered.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Set Call Forward Busy Destination Extension
Description
You can assign a Call Forward Busy Destination Extension for each extension. This is typically used
for forwarding calls to voice mail.
Operation
To set a Call Forward Busy Destination Extension using either a large-display or small-
display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 09.
3. Press the HOLD key.
4. Enter 0.
5. Press the HOLD key.
6. Dial the extension number.
104
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8109-
TRF of CFWD displays
CFWD-Busy EXT # displays
576-13-700
Advertisement
Table of Contents
