Table of Contents
Advertisement
Chapter 4. User Maintenance
6. Enter the hour (two characters) and minute (two characters).
Note: To clear an entry or existing data, press the FLASH
key.
7. Press the HOLD key.
8. Enter the day of week where:
1 = Mon, 2 = Tues., 3 = Wed., 4 = Thurs., 5 = Fri., 6 = Sat.,
0 = Sun.
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key to store the entry.
10. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Set Personal Speed Dial Numbers
Description
For a description of Personal Speed Dial (PSD), see "Personal Speed Dial" on page 179 for a Digital
Key Telephone, "Personal Speed Dial" on page 238 for a Digital Single Line Telephone (DSLT), and
"Personal Speed Dial" on page 282 for a Single Line Telephone (SLT).
Operation
To set PSD numbers:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 01.
76
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
2
:
Day of the Week displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
576-13-700
Advertisement
Table of Contents
