Automatic Day/Night Mode - Panasonic 524X07801B Technical Manual

Panasonic phone operating instructions
Table of Contents

Advertisement

Section 700 - Operation
Switch Mode
Night 1 Mode
1. Press the ON/OFF key.
2. Enter 762 for the Night 1 Feature
3. Press the ON/OFF key
Night 2 Mode
1. Press the ON/OFF key.
2. Enter 763 for the Night 2 Feature
3. Press the ON/OFF key
Hardware Requirements
N/A
Related Programming
N/A
Considerations
Day and Night modes can be assigned to FF keys on a phone. You can switch between Day 1,
Day 2, Night, Night 1, and Night 2 modes simply by pressing the appropriate key. The FF key
lights red when the System is in the assigned mode. Alternatively a Day/Night toggle mode key
can be assigned. Pressing the key toggles between modes. When in Day mode, the FF key LED
is not lit. When in Night mode, the LED lights red.

Automatic Day/Night Mode

You can set the System to automatically enter a particular Day/Night mode determined by the time of
day. Each day of the month can be assigned 1 of 3 automatic system mode patterns. Each of the
patterns can be set to change modes up to 5 times per day.
Up to 20 special days can be programmed with up to 5 automatic mode changes for the day.
An Exception Day period is available for overriding the automatic mode for extended periods of time.
For instance, if an office is shut down for the week of July Fourth, the System can be programmed to
not operate in the automatic mode for those days. The System will stay in the same mode for the
period. The mode may be manually changed at any time.
For instance, the System can be set to automatically enter Day 1 mode at 8:00 a.m. on weekdays and
enter Night mode at 5:00 p.m. on weekdays. All incoming calls, TRS and attendant group handling
would change accordingly. On Saturday and Sunday, the System would stay in Night mode.
The Automatic Day/Night modes may be set in User Maintenance. See "Set Mode Schedule" on page
91, "Set Special Day Mode" on page 93, "Set Exception Day Mode" on page 99, and "Set Day of
Week Mode" on page 101.
Hardware Requirements
N/A
576-13-700
Procedure
code.
code.
DBS 576 (USA), Revised 6/11/98
Chapter 3. System Features
Indication
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Red Night LED goes off
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Red Night LED goes off
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs 576

Table of Contents