Table of Contents
Advertisement
Chapter 7. SLT Features
•
Call Forwarding - All Calls
•
Call Forwarding - Busy
•
Call Forwarding - No Answer
Call Forwarding-All Calls
When Call Forwarding - All Calls is set, all incoming calls to an extension are immediately
forwarded.
Operation
To set Call Forwarding-All Calls:
1. Lift the handset.
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 721.
• For another extension, enter 741.
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you wish to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programed into speed dialing. (For instructions,
see "Speed Dialing" on page 276.)
5. Replace the handset.
To cancel Call Forwarding-All Calls:
1. Lift the handset.
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 731.
• For another extension, enter 751.
3. If canceling Call Forwarding for another extension, enter
the extension number.
4. Replace the handset.
Call Forwarding - Busy
When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.
256
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
576-13-700
Advertisement
Table of Contents
