Set Message Key Id Code - Panasonic 524X07801B Technical Manual

Chapter 4. User Maintenance
• N/A
Considerations
• N/A

Set Message Key ID Code

Description
(For a description of the Message Key ID Code Feature, see "Message Key ID Code" on page 70.)
On a large display phone you can use a Message key to either retrieve voice mail messages or respond
to telephone messages. To respond to voice mail messages from a 3rd party voice mail system, you
need to set the Message Key ID code to identify the caller to the voice mail system. You can also use
the Message key to program a voice mail password.
Operation
To set the Message Key ID code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 06.
3. Press the HOLD key.
4. Press the HOLD key.
5. Dial the extension number of the phone being programmed.
6. Press the HOLD key.
7. Enter the Message Key ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or existing data, press the FLASH key.
8. Press the HOLD key to store the entry.
9. To set additional Message Key ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
10. Repeat steps 7-9 until all Message Key ID codes are set.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
90
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
81-
User MAINT displays
8106-
MSG Key ID Code displays
MSGID-EXT Numbe displays
MSG-ID EXT XXX displays (where
XXX = extension number)
Next extension number displays
Desired extension number displays
MSGID - EXT Numbe displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
576-13-700