Table of Contents
Advertisement
Chapter 6. DSLT Features
Onhook Dialing
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Onhook Dialing allows users to dial without lifting the handset. However, the Digital Single Line
Telephone (DSLT) does not have a microphone so you must lift the handset to talk.
Operation
To use onhook dialing:
1. Press the ON/OFF key.
2. Enter a trunk access code, or dial an extension number.
3. If you entered a trunk access code in step 2, dial the phone
number. Otherwise, proceed to step 4.
4. When the call is answered, lift the handset to talk.
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
N/A
Offhook Signaling
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Offhook Signaling sends a tone to a busy extension to indicate that another CO call has arrived or a
call is camped on.
Operation
After receiving an offhook signal during a call:
1. Press the HOLD key.
2. Press the flashing FF key for the CO line of the incoming
call.
234
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Intercom dial tone
Result
576-13-700
Advertisement
Table of Contents
