Table of Contents
Advertisement
Chapter 5. Key Telephone Features
4. Dial the phone number to be stored.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
To assign an System Speed Dial (SSD) numbers to a one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the AUTO key.
5. Enter the SSD bin number to be programmed.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
To chain 2 to 6 SSD numbers to a single one-touch key:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the AUTO key.
5. Enter the SSD bin number that contains the first part of the
number to be dialed.
6. If a pause is required, press the REDIAL key
7. Repeat steps 4-5 (up to 5 more times) for each additional
speed dial number to be chained.
8. Press the HOLD key.
9. Replace the handset or press the ON/OFF key.
174
Action
Action
Action
DBS 576 (USA), Revised 6/11/98
Section 700 - Operation
Result
Result
Intercom dial tone
Result
Intercom dial tone
• Pause occurs between access code and
telephone number
• R displays
576-13-700
Advertisement
Table of Contents
