System Configuration - Siemens HiPath 5000 Service Manual

11.3

System Configuration

The following table indicates the maximum possible system configuration parameters for Hi-
Path Cordless Office. It also shows when
CMA or CMS is necessary
●
analog trunk access is possible.
●
Table 11-1 HiPath Cordless Office - System Configuration for HiPath 3000 V6.0
Max.
no.
– –
HiPath 3350
– –
HiPath 3300
– –
– –
HiPath 3550
– –
HiPath 3500
– –
HiPath 3550 1 –
HiPath 3750
4 –
HiPath 3700
HiPath 3800 – 4
Explanations:
BS2/2 (S30807-H5471-X200) is a base station that supports a maximum of 8 calls when connected using
●
two U interfaces.
P0/E
BS3/1 (S30807-H5482-X): is a base station that supports a maximum of 4 calls.
●
BS3/3 (S30807-H5485-X): is a base station that supports a maximum of 12 calls when connected using
●
three U interfaces.
P0/E
BS3/S (X30807-X5482-X100): The BS3/S single-cell base station guarantees the operation of a maximum
●
of one base station on the U
stations.
BS4 (S30807-U5491-X): is a base station that supports a maximum of 12 calls when connected using three
●
U interfaces. In the case of a direct connection, it is only permitted to make the connection via one U
P0/E
interface. The B channels in the base station BS4 require a license (see Chapter 8).
E
1 Up to 128 handsets are possible at an SLC16N.
2 Up to 128 MTs are possible at an SLCN.
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Maximum number of base sta-
tions BS with connection via
1xU
CMS – 1 –
CMA – 1 –
CMA 3 – –
CMS – 1 –
CMA – 1 –
CMA 7 – –
CMS 16 – 8
CMS 64 – 32
CMS 64 – 32
interfaces of the central board. It is not possible to operate additional base
P0/E
Simultaneous
calls per BS
P0/E
– – – 2
– – – 4
– 3 4 –
– – – 2
– – – 4
– 7 4 –
8 16 4 –
32 64 4 –
32 64 4 –
HiPath Cordless Office
System Configuration
– – – 8
– – – 8
– – 4 16
– – – 8
– – – 8
– – 4 32
8 12 12 64
250 (with 4
8 12 12
1
SLC16N)
250 (with 4
8 12 12
2
SLCN)
cordless.fm
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
P0/
11-3