Preparing For Installation - Siemens HiPath 5000 Service Manual

Hide thumbs Also See for HiPath 5000:

Table of Contents

Preparing for Installation

To ensure successful installation, you should check the points listed in the table below before

installing the HiPath 5000 software.

HiPath 5000 - Preparing for Installation

Hard disk parti-

The server PC hard disk should be divided into two NTFS partitions. The

main partition C should have a capacity of at least 4 GB and should be re-

served for the operating system and the HiPath 5000 software.

For safety reasons, partitioning with the format FAT 16/32 is not permitted.

Make sure that no unnecessary hardware is connected to the server PC;

any sound cards should be removed.

Access privileg-

To install HiPath 5000, you must log on to the operating system with admin-

istrator rights or, if necessary, log on as the server domain administrator.

LAN integration

Check to ensure that the server PC has been correctly integrated in the cus-

tomer LAN (see Section 6.6.2).

Miscellaneous

All applications running in the background must be closed prior to software

installation.

P31003-H3560-S403-54-7620, 09/05

HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual

HiPath 5000 Startup and Administration

Table of Contents

Hipath 3000 Hipath 3800