Inserting Or Removing Boards; Figure 4-93 Locking And Unlocking Boards - Siemens HiPath 5000 Service Manual

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
4.3.6.1

Inserting or Removing Boards

Introduction
Peripheral boards can be inserted and removed while the power is connected. Two levers are
attached to the front corners of the boards to simplify insertion and removal. When closed,
these levers engage with the board, locking it in place.
See Section 9.2.2 for information on upgrading peripheral boards.
Procedure for inserting and removing the boards (Figure 4-93)
If
Boards Swing both plastic levers outward simultaneously. You can now pull the board
Unlocking the out of the system on its guide rails.
board
(1)
Boards Slide the board into the system using its guide rails. Insert the hooks on the
Latching as- locking levers into the recesses in the shelf. Press down on both levers simul-
sembly taneously in the direction of the shelf until they snap into place.
(2)
Locking and Unlocking Boards
(1)
(2)
(2)
(1)
Figure 4-93 Locking and unlocking boards
Special board attachments
The power supply is screwed onto the grill of each cabinet.
4-162
Then
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
P31003-H3560-S403-54-7620, 09/05