Slma, Slma8; Figure 3-78 Slma/Slma8 - Leds On The Front Panel - Siemens HiPath 5000 Service Manual

boards.fm
Boards for HiPath 3000
Peripheral Boards
3.3.14

SLMA, SLMA8

Introduction
The SLMA and SLMA8 (Subscriber Line Module Analog) boards provide analog T/R interfaces
for use in HiPath 3800:
SLMA (S30810-Q2191-C300) = 24 analog T/R interfaces
●
SLMA8 (S30810-Q2191-C100) = eight analog T/R interfaces
●
The boards generate their own ring voltages and do not require an external ring generator.
For Australia only: The ring voltage is 35 V
>
ed, we cannot exclude the possibility of errors occurring during ringing state.
Front panel
Two LEDs indicating the board status:
LED (red)
●
LED (green)
●
Figure 3-78 SLMA/SLMA8 - LEDs on the Front Panel
To ensure sufficient shielding, provide the board with a shielding panel. For informa-
>
tion on mounting the shielding panel, see Section 4.2.5.2.
3-176
. Depending on the terminals connect-
eff
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
P31003-H3560-S403-54-7620, 09/05