Configuring The Alarm View - Siemens sinumerik 840d sl Configuration Manual

7.3.7

Configuring the alarm view

The following section describes how you can activate the display of DB2 alarms in a specific
alarm view.
Note that you can only activate the display of the DB2 alarms as a whole for an alarm view -
not differentiated by alarms requiring acknowledgment and not requiring acknowledgment.
Requirement
● You have configured a screen with alarm view.
Procedure
To display the DB2 alarms during runtime in an alarm view, proceed as follows:
1. Open the "Screens" editor for the screen in which the alarm view is configured.
2. Select the alarm view.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Configuring alarms
7.3 Configuring DB2 alarms
105