Siemens sinumerik 840d sl Configuration Manual page 111

4. In the "Open" dialog, navigate to the USB flash drive with the copied TS files, select them
and click "Open."
The TS files are displayed in the "Project" area in the tree structure below the associated
language.
Figure 7-5
5. Select the check box for the TS files you want to use in the TIA Portal, click "Export" and
select a folder where the CSV files are to be stored.
Result
The DB2 alarms were converted using Access MyMachine /P2P into the CSV format.
You can import (Page 100) these CSV files into the TIA Portal.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Project area with added TS files
Configuring alarms
7.4 Converting alarm files (TS/CSV)
111