Configuring Screen Resolution (Pc Systems) - Siemens sinumerik 840d sl Configuration Manual

4.4

Configuring screen resolution (PC systems)

Introduction
If you configure a PC system, the default setting for the screen resolution on the HMI device
in the runtime is 800 x 600 (OP 012). Depending on the HMI device used, you must adapt
this setting so that the configured display fills the screen on the target system.
If you enter the wrong screen resolution, the scroll bars or the picture will not fill the screen
on the HMI device.
If you subsequently change the screen resolution in the runtime settings, you must first
enable the "Fit to screen" option in the settings before making the settings in the TIA Portal
(see below).
Requirement
● A project with a PC system and Runtime software has been created.
See Inserting the SIEMENS PC system and runtime (Page 47)
● The project view is active.
Procedure
To set the screen resolution of the target system, proceed as follows:
1. Activate the "Fit to screen" option button in the "Tools > Settings > Visualization > Resize
screens and screen objects" menu.
2. Open the runtime settings in the project tree, for example, under "PC_System_1 >
HMI_RT_1 > Runtime settings > Screen resolution".
3. Make the appropriate setting for your operator panel front:
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
Operator panel front Resolution
OP 010 640 x 480
800 x 480
OP 012 800 x 600
1366 x 768
OP 015 1024 x 768
OP 019 1280 x 1024
1920 x 1080
4.4 Configuring screen resolution (PC systems)
Screen format
Standard
Widescreen
Standard
Widescreen
Standard
Standard
Widescreen
Device configuration
51