9.2
When Using the Module in a Standard System
Configuration
This section introduces program examples where the following system configuration and conditions apply.
(1) System configuration
(2) Programming condition
Digital output values are read in the following conditions.
• Used channel: CH1 to CH3
• Input range: Factory default range 0 to 5AAC
• Digital conversion method in CH1: Sampling processing
• Digital conversion method in CH2: Count average processing (50 times)
• Digital conversion method in CH3: Primary delay filter (Time constant: 100ms)
• If an error occurs in the module, an error code is displayed in BCD notation
(3) Switch setting
Set the operation mode.
Project window
156
QCPU
QY10 (Y20 to Y2F)
QX10 (X10 to X1F)
CT input module (X/Y0 to X/YF)
[Intelligent Function Module]
[Q68CT]
[Switch Setting]