Appendices; Appendix 1 Dedicated Instruction - Mitsubishi Electric MELSEC-Q series User Manual

APPENDICES

Appendix 1
(1) Dedicated instruction
The following table lists dedicated instructions that can be used in a CT input module.
Instruction
G(P).OFFGAN
G(P).OGLOAD
G(P).OGSTOR
When the module is mounted on a MELSECNET/H remote I/O station, the dedicated instructions cannot be used.
Dedicated Instruction
• This instruction switches the operation mode to the offset/gain setting mode.
• This instruction switches the operation mode to the normal mode.
This instruction reads out the offset/gain set values in a user range setting to the CPU module.
This instruction restores the offset/gain set values in a user range setting to the CT input
module.
Description
APPENDICES
A
233