Mitsubishi Electric MELSEC-Q series User Manual page 237

(4) Program example
The following shows the sequence program of the CT input module, installed in I/O number X/Y00 to X/Y0F, with
the following conditions.
• Turning on M10 switches the operation mode of the CT input module to the offset/gain setting mode
• Turning off M10 restores the operation mode of the CT input module to the normal mode
Processing in offset/gain setting mode
Processing in normal mode
APPENDICES
Store the setting data of the
dedicated instruction (G.OFFGAN)
in D1.
Dedicated instruction (G.OFFGAN)
Store the setting data of the
dedicated instruction (G.OFFGAN)
in D1.
Dedicated instruction (G.OFFGAN)
235
A