FX
/FX
/FX
Series Programmable Controllers
3G
3U
3UC
Programming Manual - Basic & Applied Instruction Edition
4.10.8
Registration of data in extension registers and extension file registers
This subsection explains the operating procedures of GX Developer (Ver.8.72A or later).
1
Starting up GX Developer (GPPW)
Click [Start]-[All Programs]-[MELSOFT Application]-[GX Developer] in Microsoft Windows.
2
Setting the PLC model
Set the PLC Series and PLC type as shown below.
Essential set item
PLC series
PLC Type
*1
*1.
For Ver. 8.18U to 8.24A of GX Developer, the PLC type is FX3UC.
140
→ For details on GX Developer operating procedures, refer to the GX Developer manual.
Contents of setting
FXCPU
*1
FX3U(C)
, FX3G
4.10 Extension Register [R] and Extension File Register [ER]
4 Devices in Detail