To Create The Target Directories - ABB 800xA User Manual

Section 5 Maintenance and Administration
Before you perform the following steps make sure to re-configure the NLB
settings with the same common name and common IP used in the previous
configuration. Failing to do so will not allow the NLB in history server to load the
cluster. To know how to configure NLB refer History 4.5 Installation
(2PAA110534*)- Network Load Balancing (NLB).
1.
2.
3.
4.
5.
6.
for /f "tokens=3*" %i in ('findstr /c:"Directory of"
"E:\Backup\Application\Misc\AppBackup\DIR_LIST_20130305_15442
3.TXT"') do md "%i"
The above command creates all the required Application directories in database
drive D.
2PAA107563-600 B
Shutdown the machine to remove the failed disk and insert new HDD for the
Database.
Start the machine. You might see some failure messages for the services with
reference to Data Collector Node as the system cannot find the database.
Open Service Control Manager, stop RTDB_CVMC Server********
service.
Go to Windows> Administrative Tools and open Computer Management.
In the Computer Management Program, navigate to Disk Management and
initialize the new disk with 64K format and assign the same Drive Name as it
was earlier for the database disk.
To restore Application Directory, do the following. For illustration purposes, it
is assumed that D drive is the Database drive and E is the backup drive.
a. To create the target directories run the following command in cmd editor.
Choose the latest time stamped DIR_LIST file to create the directories.
b. Copy the latest time stamped version of
COPY_VER_BACK_xxx_xxxx.TXT from
E:\Backup\Application\Misc\AppBackup and save it to database drive D.
c. Open the text file in Notepad, click Save As and save it as
COPY_VER_BACK.bat.
d. Run the batch file to restore the Application data.
History Server
73