Mitsubishi Electric AE-200A Instruction Book page 104

[4] Checking the electricity meter
Enter the information for the electricity meter installed at the site.
⑰ ⑱
Visually confirmed information
⑰ Enter the metering device model.
⑱ Enter the serial number.
⑲ Enter the pulse weight.
⑳ Enter the unit.
㉑ Enter the linear weight.
Note
• The actual electricity meter may list the pulse weight as [pulse/kWh].
In this case, set the pulse weight as the inverse [kWh/pulse] value.
E.g. For a [pulse/kWh] value of 10, set the pulse value to 0.1 [kWh/pulse].
WT07442X02
⑲ ⑳ ㉑
104