Mitsubishi Electric AE-200A Instruction Book page 24

Note
• In the file name, "IC" denotes energy management blocks, "MC" denotes a PI controller, and "D" denotes
data at 1-day intervals.
Note
• For CSV data (apportioned results), the \(AE-200 serial number)\"ApportionData"\ folder will be created
in the root folder of the USB memory and CSV file will be saved in this folder. Save backup copies of this
folder on the PC.
To check the serial number, touch [
the bottom left of the login window.
• Register one "Energy management block (tenant)" data file for each AE-200 unit.
• If there are two AE-200 units, register the two files in the order in which they are output.
• Do not register multiple CSV files output from the same AE-200. If multiple files are registered, the charge
rates may not be calculated correctly.
• If there are multiple AE-200 units, the charge rates will be calculated in order of registration No.
6. Click [Start calculation].
The charge rates will be displayed. (Refer to section 3-4 "Displaying charge calculation results".)
WT07442X02
Example of CSV file (air-conditioner data) selection
(Output CSV file [App_IC_D_2014-12-21_2015-02-20.csv])
] in the top right of the LCD. The serial number will be displayed in
24