Panasonic KX-NS1000 Pc Programming Manual page 198

9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Payload Type
Specifies the payload type for DTMF tones using RFC2833. Programming this parameter is only necessary if
DTMF is set to Outband (RFC2833).
Value Range
96–127
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
GW Settings–Option 3
GW Name
Specifies the name of the destination gateway device for programming reference.
Value Range
Max. 20 characters
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
T38 FAX Max Datagram
Specifies the maximum datagram size when using the T.38 protocol.
Value Range
272–512
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
T38 FAX UDPTL Error Correction – Redundancy
Specifies whether to enable the redundancy feature when using the T.38 protocol.
Value Range
Disable, Enable
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
T38 FAX UDPTL Redundancy count for T.30 messages
Specifies the redundancy count for T.30 messages when using the T.38 protocol.
Value Range
0–7
198 PC Programming Manual