Panasonic KX-NS1000 Pc Programming Manual page 28

1.2.2 PC Programming Using Off-line Mode
VoIP Test Tool
Click the VoIP Test Tool button to launch the VoIP Test Tool. This tool is identical to the VoIP Test Tool
included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs.
IP Terminal Utility
Click the IP Terminal button to launch the IP Terminal setup utility. This utility is identical to the IP Terminal
utility included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs.
Programming in Off-line Mode
Once you have logged in to Off-line Web Maintenance Console, programming is very similar to On-line mode.
The title bar will be coloured differently from when in On-line mode:
Some items are not programmable when in Off-line mode, and those items will be greyed out. Some tools and
utilities are also not available in Off-line mode. For details, refer to 2.1.2 Access Levels.
Notice
•
In Off-line mode, changes made in 6.8 Tool—Screen Customise will not be reflected in On-line mode.
This is because these settings are not stored in the system data file (DCSYS).
•
When you load the system data file to the PBX, you must install any required activation keys in On-line
mode. Activation keys are required for mailboxes. Settings such as mailbox passwords will be cleared
if the number of activation keys for mailboxes is insufficient.
Uploading Programmed Settings to the PBX
When programming in Off-line mode, clicking the
file name for the system data file. This file can then be uploaded to the PBX in On-line mode using the "File
Transfer PC to PBX" utility. For details, refer to 7.2.1 Utility—File—File Transfer PC to PBX.
Notice
•
If the PC running the Off-line Web Maintenance Console is shut down, the Web browser is closed, or
the user logs out, any changes that have not been saved will be lost. Be sure to regularly save data
while programming.
•
When you upload a system setting file to the PBX, all existing settings on the PBX will be overwritten
with the settings in the file, including settings you may not want to change. To change only specific
settings in Off-line mode, follow the procedure below:
1.
Use the "File Transfer PBX to PC" utility in On-line mode to save a file with the PBX's current
settings. For details, refer to 7.2.2 Utility—File—File Transfer PBX to PC.
2.
Use the Open -Offline Mode command in the Programme Launcher to load the PBX system file
in Off-line mode.
For details, refer to Opening an Existing System Data File above.
3.
Perform the desired programming in Off-line mode, and then click the
system settings to your PC.
28 PC Programming Manual
When programming in On-line mode:
When programming in Off-line mode:
icon will open a save dialogue box. Specify a location and
icon to save the modified