4.
Log in to Web Maintenance Console in On-line mode, and then use the "File Transfer PC to
PBX" utility to upload the modified data to the PBX.
•
When programming in Off-line mode, be careful when programming the following parameters:
–
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters—
Mailbox Password (Message client)
–
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Notification
Parameters—
These parameters require an activation key (KX-NSU2xx) to function. If these items are programmed
in Off-line mode, but the PBX does not have the required activation key installed, the values specified
for these parameters will be cleared when the data is uploaded to the PBX.
E-mail/Text Message Device—Device No. 1, 2, 3—E-mail Address
1.2.2 PC Programming Using Off-line Mode
PC Programming Manual
29