Appendix A - Signal Sources - ABB SM500F User Manual

SM500F
Field mountable paperless recorder
Appendix A – Signal Sources
Source Name
Analog Sources
Analog I/P A1 to D2
Comms AIN 1 to 24
Stats 1.1 to 1.6 max
Stats 2.1 to 2.6 max
Stats 1.1 to 1.6 min
Stats 2.1 to 2.6 min
Stats 1.1 to 1.6 avg
Stats 2.1 to 2.6 avg
Error States
AIN A1 to D2 Fail State
Comms AIN 1 to 6 Fail State
Stats 1.1 to 1.6 fail
Stats 2.1 to 2.6 fail
Archive media not present
Too many files on arc media
Archive 100% full
Archive 80% full
Arc media present
Archive on-line
Table A.1 Signal Sources
146
Analog input values (from Analog input module).
Available only if an analog input module is fitted in the relevant position.
Analog input values.
Received via the Modbus serial communications link – see Table B.14, page 158.
Maximum Statistics Input Value.
Value since the totalizer on a given channel last wrap or reset. Available only if the
totalizer option is enabled, only on analog channels and only if the relevant totalizer is
enabled in the Configuration level.
Minimum Statistics Input Value.
Value since the totalizer on a given channel last wrap or reset. Available only if the
totalizer option is enabled, only on analog channels and only if the relevant totalizer is
enabled during configuration.
Average Statistics Input Value.
Value since the totalizer on a given channel last wrap or reset. Available only if the
totalizer option is enabled, only on analog channels and only if the relevant totalizer is
enabled during configuration.
Analog Input Failure.
Active when the signal detected at the analog input is outside the 'Fault Detect Level'
specified during configuration.
Totalizer Input Value Failure.
Activated when the totalizer fails, cleared when the totalizer wraps or is reset. Available
only if the totalizer option is enabled, only on analog channels and only if the relevant
totalizer is enabled during configuration.
Active when the removable archive media is not present.
Active when there are approximately 300 files on the removable archive media.
Active when the removable archive media is 100% full
Active when the removable archive media is 80% full.
Active when the removable archive media is present.
Active when archiving is in progress.
Appendix A – Signal Sources
Description
IM/SM500F Rev. Z