SM500F
Field mountable paperless recorder
F.4 Configuration
F.4.1 Enabling Batch Security
Note. Batch security can be enabled only if the 'Security system' parameter is set to 'Advanced' – see
Section 7.6.4, page 78. If the 'Security system' parameter is set to 'Basic', batch security is
automatically disabled and cannot be enabled.
To enable batch security, access Common Configuration (see Section 7.6.4, page 78) and select the
'Security ' tab.
IM/SM500F Rev. Z
Set to 'Advanced' to enable batch security.
Appendix F – Batch Recording
177